Damper Training Is Vital Part Of Safety Culture

• Content
• Building Services
• Damper Training Is Vital Part Of Safety Culture

13 July 2026

The Building Engineering Services Association (BESA) has launched a training programme for fire damper inspection and maintenance as part of an ongoing campaign to improve fire safety standards in all UK buildings.

The new course: BESA DW145 Fire Damper Inspection and Maintenance¹ is mapped to the industry’s primary guide to good practice DW145² and the sector’s National Occupational Standard BSEFSD04. It is accredited by the specialist awarding body EAL and delivered by the BESA Academy in partnership with its training partners across the UK.

The hybrid training programme includes three days of practical work and assessments in a BESA approved training centre as well as online learning and an onsite portfolio build. Anyone who completes the training successfully will qualify to apply for the appropriate SKILLcard allowing them access to project sites.

The Association updated DW145 in 2024 following a surge in reports that annual maintenance inspections were uncovering a significant number of incorrectly installed dampers that did not comply with manufacturers’ instructions as well as many that were damaged, had never been tested, or were impossible to access.

The new training course, therefore, focuses heavily on the role of dampers as part of legal life safety requirements to ensure systems comply with the Regulatory Reform (Fire Safety) Order 2005 for England and Wales, the Fire Safety (Scotland) Regulations 2006 and the Fire Safety Regulations (Northern Ireland) 2010. It also reflects the need to meet standard BS 9999 which stipulates dampers be tested at least annually depending on system type.

All testing must be carried out by a competent person as defined by DW145 with tests and maintenance works supported by accurate and verifiable records and a full asset register logged showing the condition and location of each damper.

The training takes operatives through the whole process of an inspection from checking and recording the physical condition of the damper, including any damage to blades or the frame, to the state of the actuators and penetration seals.

It includes the process of functional testing and resetting dampers as well as interfacing with fire alarms and building control systems demonstrating that dampers often do not operate in isolation but as part of a wider fire control system.

Kevin Morrissey, Technical Director at BESA, said: “When inspecting and testing fire dampers, you’re essentially verifying that they will operate correctly in a real fire scenario and maintain compartmentation. Will they contain the spread of smoke and/or fire at the critical moment so helping to keep people and property safe?”

Morrissey continued: “Unsurprisingly, UK fire authorities are taking an in-depth interest in this aspect of building safety and many clients, although not all, are now more aware of their legal and social obligations. This, in turn, places greater pressure on damper and ductwork contractors to provide evidence of their own competence and ability to comply with legislation – hence the need for this kind of specific, targeted training.”

Morrissey added that the training reflected the increased focus on wider industry competence and compliance across the sector. It also forms part of BESA’s wider response to the heightened attention on building safety following the Grenfell Tower disaster and is designed to support those responsible for demonstrating that fire safety systems are compliant, functional, and properly documented.

1. BESA DW145 Fire Damper Inspection and Maintenance Training Course – see here

2. DW145 Industry Guide - see here

Picture: An image of a mechanical fire damper unit and text announcing the fire damper qualification.

Article written by Dave Mapps | Published 13 July 2026

Share

---

---

Related Articles

---